The main processing steps of water transfer film include: now it is necessary to apply the film, wash with water, as well as dry, spray oil, and realize the process, and now its coating Equipment, washing equipment, drying equipment, oil injection equipment, water transfer film work is still very important, and the processing technology is also very important, because the scope of application of water transfer film is also very wide, so we should pay attention to processing. There are still many

So what needs to be done for the water transfer film in the accessories now to be better? 1. The current water transfer film curing agent: and the current water transfer film is highly reactive, for example, it is sensitive to water. 2. Now we should let it stand for 15-20min after modulation. 3. And now the moisture content on the substrate should not be too high. 4. As long as it is the current paint, it must not contain water, and it is also not allowed to use alcohol solvents. 5. The wrong use or the wrong amount of curing agent for water transfer film will lead to great changes in performance. 6. If it is said that the one-time preparation cannot be too much, it will gel for a long time. 7, and now the water transfer film can not be used as the base of physical dry paint. If it is the last thick coating, it is easy to foam. The ordinary type is easy to yellow, and the non-yellowing type is expensive. 8. We absolutely want a short shelf life, and the curing agent needs to be sealed well after opening and used up as soon as possible. It must also be that the paint that needs to be fully cured will not adhere well, and it still needs to be carefully polished. 9. Now the drying speed of water transfer film is greatly affected by temperature. And now it takes about three weeks to completely dry at 25 degrees.