Water transfer filmOperation requirements:
1. Ensure product cleanliness and electrostatic removal before water transfer film.
2. The transfer water tank must be clean and thorough, and there should be no floating impurities left on the water, and the residual ink film skin floating on the water surface.
3. When placing the water transfer film to coat the film, you must recognize the front and back of the film when placing the film. When the front and back of the film are not, you can use your hand to dip a little water to test it, and put the sticky side in the water above, but be careful not to. Do not splash water on the water transfer film. Pay attention to the film release angle (30-40 degree inclination). At the beginning, straighten the water transfer pad printing coating film and push it from one side of the water transfer tank to the other side, taking care not to generate air bubbles.

Advantages of water transfer film:
1. Aesthetics. Natural textures, photos and graphics can be transferred to the product.
2. Innovation. Water transfer printing technology can overcome the problems of complex shapes that cannot be produced by general traditional printing and thermal transfer printing, pad printing, screen printing, and surface coating.
3. Versatility: suitable for surface printing of hardware, plastic, leather, glass, ceramics, wood and other products (not applicable to cloth and paper), not limited by the shape of the product, especially complex or large area, super long, Extra wide products can also be decorated.
4. Efficiency. No plate making is required, and the drawings can be drawn directly.
5. Superiority. It can quickly proofing, surface printing, personalized color painting and non-paper and cloth prints with small quantity and many patterns.
6. Environmental protection. Residues and waste water do not pollute the environment.