​What are the steps in the main production process of water transfer film? Known as a relatively environmentally friendly technology, it is also the most emerging efficient printing production, probably related to his separation from the ink in the printing process. Water transfer uses water pressure and activator to dissolve and transfer the peeling layer on the water transfer carrier film. The basic process is:

1) Film printing: printing various patterns on the polymer film;

2) Spray primer: Many materials must be coated with a layer of adhesive, such as metal, ceramics, etc. If you want to transfer different patterns, you must use different background colors, such as wood grain basically use brown, brown, soil Yellow, etc., the stone pattern is basically white, etc.;

3) Extension of the film: let the film lay flat on the water surface, and wait until the film is stretched flat;

4) Activation: The pattern of the transfer film is activated into an ink state with a special solvent (activator);

5) Transfer: use water pressure to print the activated pattern on the printed object;

6) Washing: wash the remaining impurities of the printed workpiece with water;

7) Drying: Dry the printed workpiece, and the temperature depends on the elemental properties and melting point of the material;

8) Spray paint: spray transparent protective paint to protect the surface of the printed object;

9) Drying: dry the surface of the object after spraying the topcoat